CONVERSION REFERENCE

What do I set
the dial to?

Pick a compound and pick the amount. The setting is the answer. If you have only ever handled powder in a vial, this page replaces that work.

5numbers on the dial
12clicks per number
60clicks, full dial
4full dials per cartridge
01

What compound do you have?

02

What MG is your dose?

1MG PER DOSE

Ten settings, 6 clicks apart. Every one lands exactly on a click.

03

Now twist the dial and set it to

KRN-WOLVERINE · 20MG

#112 CLICKS

Delivers 1MG · 20 doses per cartridge before priming

04

What does my dose contain?

BPC‑1570.5MG
TB‑5000.5MG
KRN‑WOLVERINE · 20MG CARTRIDGE · BPC‑157 10 / TB‑500 10
Dial settingClicksDoseBPC-157 MGTB-500 MGDoses before priming
6 clicks60.5MG0.250.2540
#1121MG0.50.520
#1 + 6181.5MG0.750.7513
#2242MG1110
#2 + 6302.5MG1.251.258
#3363MG1.51.56
#3 + 6423.5MG1.751.755
#4484MG225
#4 + 6544.5MG2.252.254
#5605MG2.52.54

This converts between the amount stated on the cartridge and the setting on the dial. It is not a protocol, not a recommendation and not dosing guidance.

FIRST USE

Start here.

Six steps, once, and the system behaves the same way every time after that.

  1. 01

    Take it out of the fridge

    The cartridge is sealed at origin and ships cold. Let it come up from refrigeration before the first use, and keep the seal intact until you are ready.

  2. 02

    Attach a needle head

    Needle heads are 32G 4mm and are not included, so they are acquired separately. One twists onto the collar until it seats firmly. That is the only assembly the system asks for.

  3. 03

    Prime before the first dose

    Priming clears air from the needle so the setting you dial is the amount that actually leaves the device. Prime with a fresh needle head attached, before the first dose, and follow the priming instruction supplied with your unit.

  4. 04

    Set the amount

    Turn the dial to the setting for the amount you want. Five numbered settings, twelve clicks between each, and the calculator above converts any amount into the exact setting.

  5. 05

    Dispense

    The number showing in the window is the amount delivered. Nothing is measured, drawn or converted, so the same setting repeats identically across a research protocol.

  6. 06

    Refrigerate between uses

    Return the unit to 2 to 8 °C and keep it out of light. That is what holds peptide integrity across a sealed stability window of up to 12 months.

WHAT IT REPLACES

The work that
disappears.

NO RECONSTITUTION

The compound is already in solution, pre-compounded at origin in saline and Class 3 Pure Water.

NO BACTERIOSTATIC WATER

Nothing to source, nothing to add, and no open vial sitting through repeat draws.

NO CONCENTRATION MATHS

The amount is a setting on a dial, not a calculation you carry out correctly every single time.

PROOF

Every unit answers
to its lot.

The amount on the cartridge is the amount an independent laboratory measured. Scan the code on the box, or open the record directly, and read the analysis against the lot in your hand.

Open the certificate archive
See the compounds